No matter where you live, we ship worldwide with UPS
Go to homepage
€0.00
Support
Categories

General OEM Product Support

The OEM UcD® Family; World wide well known top-notch amplifier modules perfect for the use in a multichannel application. With the wide range of different power ratings and the small form factors of these modules these are very easy to use in a multichannel amplifier setup together with our Switch Mode Power Supplies. From 32 channels 100W to 4 channels 2500W and anything in between.

The OEM NCORE® Family; high-end amplifier modules, perfect for high-end power amplifiers together with our Switch Mode Power Supplies. Also, high-end touring amps can be built with these amplifier modules.

A SMPS is a high efficiency Switch Mode Power Supply specifically designed to be used in combination with our amplifier modules from the UcD™ and NCORE® Family. These can be used for mono and stereo setups as well as for multichannel applications.
With a minimum of 2x better noise reduction and THD compared to the NCORE®, our eXceptional NCOREx technology is our answer for your future High-End audio products. Focus on even better audio performance and added functionality. The NCOREx® OEM are ideal amplifier modules for any mono, stereo, multichannel and active speaker application which demands nothing but the best.
The Mains Powered NCORE® Family is a truly high-quality all-in-one amplifier. The modules have one or two amplifier channels on board in power ratings from 125W to 500W per channel together with a Switch Mode Power Supply. Perfect for the use in a HiFi mono or stereo amplifiers or a musical instrument amplifier. Very easy to integrate also with the available NC100HF extension amplifier, especially designed and suitable for a tweeter. One can easily make an active 3-way setup with these modules.
The NCORE® Active Speaker Family is specially designed for professional active 2-way loudspeakers. The combination of an asymmetric amplifier and a Switch Mode Power Supply at one board is the key to easy integration. Other than our other amplifier solutions these modules are tuned for top performance in 8Ohm.
A Digital Signal Processor is a platform which can be used for example in active loudspeakers, pre-amps or integrated amplifiers to manage the signal processing. 
A Fusion Amp is an aluminum plate which contains a mounted DSP and 1, 2 or 3 amplifiers with on board power supply. To be used in active loudspeakers and subwoofers. Also called a plate amplifier.
Our products are intended to be used for reproduction of audio. The use in any other application is not supported and at your own risk.
A class-D amplifier or switching amplifier is an electronic amplifier in which the amplifying devices (transistors, usually MOSFETs) operate as electronic switches, and not as linear gain devices as in other amplifiers. They operate by rapidly switching back and forth between the supply rails, being fed by a modulator using pulse width, pulse density, or related techniques to encode the audio input into a pulse train. The audio escapes through a simple low-pass filter into the loudspeaker. The high-frequency pulses, which can be as high as 6 MHz, are blocked. Since the pairs of output transistors are never conducting at the same time, there is no other path for current flow apart from the low-pass filter/loudspeaker. For this reason, efficiency can exceed 90%.
In basic Hypex amplifiers match with every pre-amplifier, for tube pre-amps please refer to the chapter "Cables and connections".
In principle Hypex amplifiers match with every loudspeaker, of course you need to match it correctly. Our advice is to use an amplifier which is capable of providing a little more power than your speakers require. Of course, it is not required to have a very powerful amplifier, at least take an amplifier module which is capable to provide the power a speaker can handle. If you use an undersized amplifier, you can imagine the amplifier has to run on top performance all the time with risks of clipping and can even damage your valued audio equipment.
For our OEM customers we like to give personal guidance as every project has his own requirements, therefor please contact our sales department by email at sales@hypex.nl

Our "application" page already guides you in our available solutions.
This website uses cookies to ensure the best experience possible. More information...